Javascript Menu Dhtml by Vista-Buttons.com v5.5
Home Vertex
Magnetos HEI
Distributors Alternators Tachometers Spark Plug
Wires Carb Spacers Tips & Tricks Feature
Winners Champions
Javascript Menu Dhtml by Vista-Buttons.com v5.5
 
Part#  3190-30
Alternator
W/ Pulley
$178.00
Part# Mag 3000
 Light Weight Mini one Wire Alternator Kit
 $349.00
Part#
3190-29

 Voltage Regulator
 $48.00
 
7 lb. True single wire alternator, which uses only one # 10 wire hooked directly to the battery or hot buss bar, no need for an on/off switch as it will start all by itself after it spins up to approximately 3,000 rpm.
The voltage output is regulated by a small light-weight regulator mounted directly to the back of the alternator which supplies 14.5 volts and 38 amps to your electrical system.
The Mounting Bracket assembly is high strength aluminum which is designed to bolt directly to the right side of the water pump. This one bracket will bolt up to any small block and big block Chevy engine with a short water pump.
The drive pulleys are high strength deep groove billet aluminum. The water pump drive pulley will fit the 5/8" and 3/4" water pump shaft.
The alternator kit comes complete with all parts and hardware needed to bolt up to your engine with ease and simplicity. This unit will not effect your present pulley arrangement. The only change is that your fan blade will move forward the width of the alternator water pump drive pulley. Replacement parts are available.
This alternator and the brackets can be used on Drag Cars, Circle Track Cars, Boats and Street Rods. 

3190-17 mount bracket with spacers &bolts_________54.30

3190-18 4" water pump pulley w/slug________________51.70

3190-19 3" alternator pulley_________________________41.00

3190-24 hex adj. link w/heims & bolts & spacers____29.85

3190-28 v belt_______________________________________14.60

     NOTE ALL OF THESE PARTS ARE DESIGNED TO FIT THIS ALTERNATOR

   
would you like 16 volts for your ignition with out a alternator or special battery and battery charger. this is the answer this little unit is a step up voltage converter 12v in 16v out to the ignition. simple and sweet.

cost 300.00